[. . . ] Quick Start Guide PORTABLE JUKEBOX RECORDER MODEL HR-GB201 Follow the setup procedures before you use this unit. Refer to the operation manual for details. If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. [. . . ] Whilst the unit is connected to the PC, the screen below appears. 2 Connect the AC adaptor to Note: The operation buttons on the main unit do not work if it is connected to a PC. Disconnect the PC to operate on the unit. -3- HR-GB201_QG 9JCG5230100022 Transferring audio data (Navigation window) You can transfer audio data (MP3, WMA or WAV format) to the unit. 3 Select audio data on the PC and click "Send To Player" on the "Edit" menu. Audio data is transferred to the "Jukebox_Sys" folder on the "SHARP" drive. 1 Connect the unit to a PC. 2 From the "Start" menu, click "All Programs", "Sharp Music Manager", and then "SharpMusicManager". The navigation window appears. -4- HR-GB201_QG 9JCG5230100022 Playing transferred audio data Left channel L Right channel R Observe the correct direction for the plug. 1 Hold down the 2 Use the button for 2 seconds or more. To turn off the power: Hold down the button for 2 seconds or more. 00 03 30 10 (Playback window) -5- HR-GB201_QG 9JCG5230100022 Recording from the built-in microphone or a CD player Audio cable (commercially available) To audio output sockets Microphone CD player Built-in microphone You can record voice data with the built-in microphone. CD player Music from CDs is recorded as MP3 files. 1 Hold down the 2 Hold down the button for 2 seconds or more. [. . . ] Playing the voice data. 2 Hold down the MENU button 3 Use the or button to select "RECORD", and press the button. 5 Use the or button to select data to play and press the button. [. . . ]